Dual pump (with pressure sensor)
Dual pump (with pressure sensor)
Dual pump (with pressure sensor)

Dual pump (with pressure sensor)

Art.Nr.:
KP-22-13S
ca. 2 Wochen ca. 2 Wochen  (Ausland abweichend)
3.750,00 EUR

zzgl. 19% MwSt. zzgl. Versand

Auf den Merkzettel
Frage zum Produkt
Beschreibung

Dual Pump KP-22 Series

Dual Plunger Pump
A general use pump equipped with pressure sensor

Features

  • Cam-driven design with high flow accuracy and low pulsing
  • Pressure sensor allows setting upper/lower limits
  • 6 separate configurations of flow range/pumphead material
  • RS232C control protocol
 ,
Part numberKP-22-01SKP-22-01PKP-22-13SKP-22-13PKP-22-33SKP-22-33P
Pumphead material

SUS

PEEK

SUS

PEEK

SUS

PEEK
Max pressure*1

25 MPa (3625 psi)

20 MPa (2900 psi)

25 MPa (3625 psi)20 MPa (2900 psi)5 MPa (725 psi)5 MPa (725 psi)
Flow rate range*20.001 - 1.000 mL/min0.01 - 10.00 mL/min0.1 - 50.0 mL/min
Flow per stroke4 &mu,L32 &mu,L

154 &mu,L
Plunger stroke

2 mm

4 mm4mm
Flow accuracy

<, 0.3 %
FeaturesPulse control*3, Consistent pressure flow*4, Set volume dispensing*5, Upper/lower pressure limiters*6
Pressure accuracy

<, 5 %
Wetted materials
SUS:Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK, SUS
PEEK:Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE PEEK
Remote control

Input:PUMP ON / OFF, Output:Error signal
Communication

RS232C
Dimensions144 (H) ×, 79 (W) ×, 285 (D) mm, excluding protuberances
Weight

Approx. 4.3 kg
Power

AC100 - 240 V (50 / 60 Hz) MAX 80 VA

*1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.
*2: The unit cannot run continuously at maximum flow rate.
*3: Pulse control is based on cam rotary compensation, activated below a flow pressure of 5 MPa.
*4: Set consistent pressure flow mode adjusts the flow rate in real time to stabilize pressure. It uses the
average of measured pressure and does not attempt pulse control.
*5: In set volume mode, when the set volume has been dispensed, pumping automatically stops.
*6: The lower pressure limiter can only be set by RS232C remote control.